Deeksha Analytical Private Limited

 Schuett-biotec GmbH's Manual Colony Counter has following features & Specification.

-        three modes of illumination: from below, from the side and from the top (optional)

-        Petri dishes or nutrient disks with Ø 90 mm, Ø 60 mm or Ø 150 mm (optional)

-        high transparency of colonies reached by LED-light source - practically no heat transferred to the sample

-        light intensity, pressure sensitivity for count and acoustical counting signal adjustable

-        average determination

-        data transfer via USB

Designed for reliable and efficient counting of bacterial colonies and bacteriophage plaques growing on nutrient agar or nutrient disks/filter disks in Petri dishes.

For Petri dishes up to Ø 150 mm.

Easy adjustable illumination intensity. Three modes of illumination – sideways from below, sideways from above and top-light (optional).

State-of-the-art LED-light allows for glarefree illumination without blinding or straylight. No eyestrain. A sofar unknown transparency and differentiation is obtained. Contrast-disk for counting colonies in light and dark fields for the use with clear or dark agar. Adjustable pressure-sensitivity for counting. Designed for ergonomic and relaxed working.

Accurate color re-production makes it easier to distinguish between differently coloured cultures on selective culture media and nutrient disks in food analysis. With process water and waste water, the high contrast illumination simplifies the task of distinguishing between colonies that develop within the agar and colonies that grow on the agar surface.

The counting impulse is realized by marking the colonies with an ordinary felt-tip marker pen. An acoustical signal confirms each sound its sound level is individually adjustable.

The attachment is equipped with a pen holder.

With a 4-digit LED-display (0-9999) and a clearly arranged keypad for all controls.

The DSC has been developed in conjunction with the powerful software to provide superior performance. This new instrument has been designed from the ground up  to

Effective measurement of heats of reaction, glass transition, melting enthalpy, purity, and heat capacity is essential for material characterization and quality control.

 The sensor of SCINCO DSC (Differential Scanning Calorimeter) is a heat flux plate, designed to provide superior performance and rugged reliability. 

 The heat flux plate is capable of measuring small energy changes over the entire temperature range, ensuring precise and accurate results.

 SCINCO DSC is ideal for a wide range of applications, from determining the thermal properties of polymers and pharmaceuticals to assessing the purity of materials. 

 Its advanced design allows for detailed analysis of thermal events, providing critical insights into material behavior.

 With SCINCO DSC, you can achieve high sensitivity and reproducibility in your measurements, enhancing the reliability of your data. 

The Sykam RESEARCH HPLC System is intended for the ambitious analyst. The system configuration is highly variable and several upgrade options make this system suitable for the whole range of analytical applications.

The S 600 range consists of micro, analytical and semi-preparative pumps, an autosampler with a capacity of 120 samples and optional sample temperature control, column ovens and a range of detectors. Apart from complete automated PC-controlled configurations, the modular nature of the system also allows for independent operation of each unit of choice. The Sykam S 600 System also offers advanced digital and analog connectivity to enable maximum integration possibilities with existing HPLC systems. Software Fully 21CFR Compliance.

The available pump configurations are: The isocratic pump, the low pressure quaternary gradient pump with adjustable mixing volume and dynamic mixer and optional built-in degasser and a high pressure binary gradient system. A high pressure binary gradient system can be configured by using two pumps. The pump is available as stainless and as biocompatible PEAK version. With three available flowrate ranges (micro, analytical and semi-preparative version), the pump configuration can be adapted to virtually any HPLC application

Available detectores are UV-Vis, PDA, Refractive Index

Wine and must analysis tool

Gibertini Elettronica S.R. , Italy’s WINEMATIC is a multi-parametric analyzer with photometric reading system for the dosage of organic acid food constituents (malic, lactic, citric, acetic, tartaric, etc.), sulphites, sugars (glucose, fructose, sucrose), and many other components.

WINEMATIC allows you to manage multiple parameters on the same sample, and is therefore the ideal solution for laboratories and companies that want to efficiently monitor the production process of the wine.

WINEMATIC has an analytical productivity that allows to obtain accurate results in short time.

The operator must add the sample and reagent to the cuvette and the instrument manages the analytical procedures provided for in an enzymatic and / or colorimetric test.

Advantages :

·         Multi-parametric

·         Liquid reagents stable until the expiration date

·         Single-test reaction cuvettes

·         Pre-calibrated instrument, operational in two minutes from power on

·         Easy to use

·         Flexible methods

·         Ideal for laboratories and industries

·         Accurate results in less than 15 minutes

Lumi - Single Tube Luminometer – is convenient with its compact design and a 7.0” touch-enabled LCD screen. Its embedded PMT technology precisely measures light emitted from chemiluminescence reaction. Data can be easily backed up using a USB flash drive.

Features and Benefits :

Compact size and simple to use :

·         Compact size takes up only a small portion of your lab

·         Easy protocol setup by  touching 7.0 inch LCD

·         Measurement  data display  and archiving through the touch LCD 

Light Measurement :

·         Luminescence  measurement by PMT

·         Limit of  Detection : 1 x 10¹⁸ moles of  ATP

·         Liner dynamic range : 7-log

Convenient  Maintenance :

·         Easy to  maintain hygienic condition

·         Simple data backup and software upgrade 

User  Interface :

·         Available detection modes : End-point & kinetic detection

·         Available setup variables : Integration time, Delay time , No. of  runs, and Detector (PMT) Sensitivity control

• Easy to backup  data using USB drives ( Up to 60,000 data)

Measuring the luminescent characteristics of molecules, the new FluoroMate FS-2 is not only used in quantification and qualification, but also available for analyzing
the structure of macromolecule, bonding between molecules, reaction in solution, and distance between molecules, etc.
Using the highly precise and sensitive Grating and PMT detectors, the FluoroMate FS-2 can measure excitation spectrum and emission spectrum, and using synchronous scan function, it can also measure the samples that contains multi-components. Adjusting the slit width by software and applying the adaptive experimental conditions depending on the samples characteristics, the user can get the precise results. As FluoroMate FS-2 has lamp intensity monitoring function, it can get the accurate and reproducible results.

GENERAL FEATURES

·         Display of surface tension value expressed in mN/m (dyne/cm) measured with the Wilhelmy method

·         Precision: ± 0.02 mN/m (dyne/cm)

·         Capacity: 1-1000 mN/m resolution 0.01 mN/m

EQUIPMENT

·         Manual adjustable lab jack

·         Thermometric probe PT 100 1/3 DIN:, temperature range: 0-50°C, Accuracy: ±0.05°C, Readability: 0,1 °C

·         Glass plates (dimensions 24x24x0.15 mm)

·         Suspended system for the arrangement of glass plate

Biokel LLP USA,

Highly efficient electron emission, a maximum of 350μA. Quality mass analyzer with pre-filter reduces quadrupole pollution.

High-energy dynode electron multiplier ensures good sensitivity. Full Scan and selective Ion Monitoring modes are available, the system supports manual and automatic tuning, display of total ion current and mass chromatogram. The data processing section searches target compounds based on mass spectra of samples, displays search results which include retention times, structural formula and standard mass spectra, and compares the abundances of standard and real target ions. Users can make accurate qualitative and quantitative analyses.

·         The Sykam S 500 System Series of HPLC instruments are designed to allow configuration of a complete automated HPLC in a “tower-concept” with a small footprint, taking up as little as possible laboratory bench space. With a choice of manual control or complete system control by a PC with control software, the S 500 series of instruments allows flexible configuration for a multitude of HPLC applications. The available pump configurations are: The isocratic pump, the low pressure quaternary gradient pump with adjustable mixing volume and dynamic mixer and optional built-in degasser and a high pressure binary gradient system. A high pressure binary gradient system can be configured by using two pumps. The pump is available as stainless and as biocompatible PEEK version. With three available flow rate ranges (micro, analytical and semi-preparative version), the pump configuration can be adapted to virtually any HPLC application. Software Fully 21CFR Compliance.

SYKAM GERMANY
 

Nabi – UV/VIS Nano Spectrophotometer can conveniently read samples in cuvette or micro volume, and also receive results from single wavelength and full spectrum  Nabi is a standalone instrument which utilizes 7.0 inch touch-enabled LC. All data can be transferred to PC just with a USB.

Variety & Precision  in Detection :

·         End-point and Kinetic mode in Detection

·         High-speed Spectrum  Reading ( 5 seconds) Accurate detection ( less than±0.002)

·         Wide range of Wavelength Detection  with Cuvette

·         Nano Volume Sample Measurement (Nucleic Acid/Protein)

·         High Repeatability in Quantitative- Measurement for Nucleic Acid 

Simple & Light in Design

·         Compact size and Light weight

·         Easy operation and Minimized steps for measurement and analysis

·         7.0 Inch Touch LCD

·         Quick Boot – No lamp warm-up time

·         Stand –Alone – Perform all functions without PC 

Result Analysis

·         Single Wavelength/Spectrum Selection.

·         End point/Kinetic Mode Selection.

·         Quantitative Measurements for Nucleic Acid, Protein, and etc.

·         Cell Concentration.

·         Simple Data Back up and software Upgrade via USB Flash Drive.

•    Easy to confirm the result via Graphical presentation.

Diamond is  the perfect solution to efficiently carry out immunoassays with superb precision and accuracy. Diamond maximizes the lab throughput by full automation of all steps and stages required in microplate immunoassays including sample loading, reagent handling, washing, incubation, shaking and reading. In addition, multiple assays can be processed at once, saving time and manual labor. Moreover both ELISA and CLIA can be performed within one system.

Features and Benefits  :

·         Fully automated immunoassay system.

·         Zero carry-over by using disposable tips for liquid handling

·         Level sensing  for samples, reagents and washing solutions.

·         Multiple assays can be performed in one run.

·         ELISA and CLIA platform in one system.

·         Serial pipetting to optimize the speed  of the assay.

·         Fast  and accurate  movement with great repeatability.

·          Variable fittings to accommodate any bottles or tubes.

·         8 manifold needles and washing point adjustment control.

·         Simple and  intuitive User interface.

·         Wide range of customizable settings for optimum flexibility.

•    Universal open platform ( Custom platform available)

The system PAMAS SVSS is a standard laboratory particle counter for pharmaceutical applications (control of  infusion solutions, ophthalmic & oral fluids) and other low-viscous liquids. The instrument may be used as “stand alone” or software controlled. Software Fully 21CFR Compliance.

Features

·         Customizable measurement settings

·         16 freely adjustable

·         size channels (32 channels upon request)

·         Integrated magnetic stirrer

·         Use of any sample vessel

·         Measuring volume of 100 µl to 1000 ml

·         Automatic sample flow and volume control via a stepper motor driven syringe module

·         Interchangeable syringes with 1 ml, 10 ml and 25 ml volume

The PAMAS SBSS is a particle counting system for batch sampling. The PAMAS SBSS is the standard instrument used as a reference in many testing labs. The instrument may be programmed to measure a sample without the need of an operator, like pre-filling the internal dead volume, degassing the sample with vacuum, pressurizing the sample for a number of measurement runs, and relieving pressure at the end. High accuracy and repeatability, fast purging and back flush possibility are the key benefits of the system. Software Fully 21CFR Compliance.

Features

·         Customizable measurement settings

·         16 freely adjustable size channels (32 channels upon request)

·         Pressure sampling up to 10 bar

·         Optional vacuum cycle for sample degassing

·         Integrated magnetic stirrer

·         Use of any sample vessel with a max. diameter of 7 cm and a height of 18 cm

·         Measuring volume of 1 to 1,000 ml

·         Automatic sample flow and volume control via a stepper motor driven syringe module

Mobi is a monochromator-based microplate spectrophotometer, quantifying nucleic acids, proteins, cell-based samples to ELISA results, measures wide range of samples fast and precisely. Wide range of wavelengths from 200 nm to 999nm allows various field applications.

Product Introduction :

·         Mobi features monochromator-based measurement optics to offer  a wide range of wavelengths from UV visible spectrum.

·         The cutting-edge technologies and system structure in Mobi allow precise movement and detection.

·         The system support measurement on 6 to 384 well microplate.

Product Design:

·         The system offers various measurement modes : End-point, Spectral and area scanning , Kinetic ,etc.

·        In addition to the measurement, the system can carry out  various supportive functions : shaking, incubation , measurement  monitoring , delay etc.

·         Light weight, compact size  and distinctive shape make the device easy to transport and relocate.

Software :

·         Separated sequence protocols, layout allow the user interface to achieve great flexibility and simplicity in setting, editing, and executing  the measurements.

·       Graphical presentation of data allows users to analyze the results with convenience and efficiency.

• The measurement  data can be exported as simple charts or  full report in Excel sheets, PDFs, other formats.

Excellent optical system, high level mechanical system, advanced circuit control system, rigorous production process, friendly and intuitive software interface, good technical specifications, stable and reliable performance can meet the analysis requirements from high level and professional customers.

• Appearance and internal structure
  Modern and elegant appearance, extendable design, separate structure design for optical and circuit system can efficiently avoid the loss of photometric energy.
• Convenient and intuitive operation interface
  This series has 7-inch high resolution color capacitive touch screen and newly developed UV-SUPER2.0 software with strong functions, which make the operation simple and easy.
• Excellent performance and stability
  Totally enclosed monochromator and optical mirror coated with SiO2 guarantee the optical components are not influenced by gas and environment.

• Philips and Milas lamps
• Newly improved screw pole drive structure makes good wavelength repeatability and high wavelength accuracy
• Totally new design, superior materials and rigorous production process.
• Advanced photoelectric test system
• 32 bit ARM11 microcontroller with clock speed up to 533MHz
• 20 bit analog digital device specialized for photoelectric data collection and processing from BB company.
• Support internal data storage(32M) and external USB storage.
• Simple and convenient maintenance
• Socket type lamps make the optical adjustment not necessary and maintenance much easier.
• Separated Optical and circuit system has no cross influence and make the instrument more reliable.

JASCO INTERNATIONAL CO., LTD.,
The FT/IR-4000 and FT/IR-6000 Series of compact FTIR spectrometers offers reliable operation with  the highest performance specifications.  Including a sealed (45 or 28 deg) interferometer with corner-cube mirrors and AccuTrac™ DSP technology for rapid and accurate tracking of mirror position and velocity for optimum wavenumber precision and signal-to-noise performance.

6000 Series of FTIR spectrometers. JASCO is proud

to offer unrivaled, class-leading performance in

FTIR spectroscopy, using the best in materials and

electronics technology available today.

The new BI-2500 benchtop SPR system offers 3-channel flow mode and delivers high quality binding response for low immobilization and small molecule (<100 Da) detection. Its innovative modular design provides users with optimal flexibility to choose amongst various analysis modules for life science, electrochemistry, and biosensing in liquid and gas phase SPR applications. In addition, its fast detection is ideal for the study of fast kinetics of redox-induced conformational changes in proteins and other biomolecules.

• Three-channel SPR detection module Provides greater flexibility and faster assay development, doubling the throughput over two-channel SPR systems
• Innovative multi-module design Provides users with maximum flexibility to choose amongst various analysis modules for electrochemistry and chemical vapor applications
• Wide dynamic range and high sensitivity High sensitivity (<10-4 degrees) for both large and small molecules (<100 Daltons) enables users to measure binding constants down to a few pM-1
• Broad response time For slow (hours) and fast (< ms) kinetic processes

Cost effective System has been designed with affordability in mind, brings SPR technology to your lab on your budget and with your own assay development schedule

• AISI 316 stainless steel supporting structure
• Vertical sliding plexiglass protection
• Cooling water inlet control (temperature, pressure and flow)
• Automatic alerts: flask missing, open drains or guards

• BIOSENSING INSTRUMENT, USA

The 5-channel Surface Plasmon Resonance (SPR) instrument

BI’s SPR system is module-based, designed specifically for user flexibility and versatility. Our interchangeable analysis modules allow users to easily switch among fluid injection, electrochemical, and gas phase detection applications. detection applications.